Olympus E-520 取り扱いマニュアル

97

EN

You can select the method to erase images recorded in RAW+JPEG. This function can only 
be used to erase one frame.

Erases all JPEG image files, leaving only the RAW image files.

Erases all RAW image files, leaving only the JPEG image files.

[RAW+JPEG] Erases both image file types.

x

• This function is effective only if deleting one frame. For all-frame erase or erasing selected 

frames, both RAW and JPEG will be erased regardless of this setting.

When you take a picture, the camera assigns it a unique file name and saves it in a folder.
File names are assigned as shown in the illustration below.

Even when a new card is inserted, the folder numbers are retained from the previous 
card. If the new card contains an image file whose file number coincides with one 
saved on the previous card, the new card’s file numbers start at the number following 
the highest number on the previous card.

When a new card is inserted, folder numbers start at 100 and file numbers start at 
0001. If a card containing images is inserted, the file numbers start at the number 
following the highest file number on the card.

• When both the Folder and File No. reach their respective maximum number (999/9999), it is not 

possible to store additional pictures even if the card is not full. No more pictures can be taken. 
Replace the card with a new one.

You can customize the initial position of the cursor ([YES] or [NO]) on the Erasing images or 
Formatting the card screen.

You can set the resolution for printing images in advance. The set value is recorded on the 
card with the images.

Automatically set according to the image size.

[CUSTOM] You can make the desired setting. Press 

d to display the setting screen.

s0018_e_00_0_unified.book  Page 97  Tuesday, March 18, 2008  4:08 PM