Olympus E-300 ユーザーズマニュアル
4
V
arious shooting functions
62
Using the electronic flash
The following instructions describe how to connect and use the FL-50 electronic
flash (optional). Be sure to attach the flash to the camera before turning on the
flash’s power.
flash (optional). Be sure to attach the flash to the camera before turning on the
flash’s power.
1
Remove the hot shoe cover by sliding
it in the direction indicated by the
arrow in the illustration.
it in the direction indicated by the
arrow in the illustration.
● Keep the shoe cover in a safe place to avoid
losing it, and put it back on the camera after
flash shooting.
2
Attach the FL-50 electronic flash to
the hot shoe on the camera.
the hot shoe on the camera.
● If the lock pin is protruding, turn the shoe lock
dial as far as it will go in the direction
opposite to
ß
LOCK. This will pull the lock
pin back inside.
● For instructions on how to attach the flash,
refer to the FL-50’s manual.
3
Turn on the flash.
● When the charge lamp on the flash lights up,
charging is complete.
● The flash will be synchronized with the
camera at a speed of 1/180 sec or less.
4
Select a flash mode.
~
“Selecting the flash mode” (P. 58)
(flash mode) button
Lock pin
Shoe lock dial
P A S M
Available modes
Flash shooting
04E-300EN-P53 04.10.22 11:22 AM Page 62