Olympus E-300 ユーザーズマニュアル
4
V
arious shooting functions
64
Using commercially available flashes
The amount of light emitted cannot be adjusted on commercially available flashes
except for those specified. A small versatile flash can be synchronized with the
camera at a shutter speed of 1/180 sec. or less, whereas a large flash (such as a
studio flash) can be synchronized at 1/125 sec. or less. For details on non-
specified commercial flashes, refer to the next page.
except for those specified. A small versatile flash can be synchronized with the
camera at a shutter speed of 1/180 sec. or less, whereas a large flash (such as a
studio flash) can be synchronized at 1/125 sec. or less. For details on non-
specified commercial flashes, refer to the next page.
1
Remove the hot shoe cover to connect
the flash unit to the camera.
the flash unit to the camera.
2
Set the exposure mode to M mode,
then set the aperture value and
shutter speed.
then set the aperture value and
shutter speed.
~
“Manual shooting” (P. 49)
● A slower shutter speed may produce blurred
images.
3
Turn on the flash.
● Be sure to turn on the flash after attaching
the flash unit to the camera.
4
Set the flash control mode on the
flash to AUTO. Also set the ISO
sensitivity and aperture value on the
flash to match the camera’s settings.
flash to AUTO. Also set the ISO
sensitivity and aperture value on the
flash to match the camera’s settings.
● Refer to the manual for the flash to set its
flash control mode.
Flash shooting
● The camera’s flash mode except 2nd curtain will have no effect on the non-
specified commercial flashes.
● The flash fires each time the shutter is released. When you do not need to
use the flash, turn off the flash’s power.
● Check beforehand that the flash you are using is synchrorized with the
camera.
Note
04E-300EN-P53 04.10.22 11:22 AM Page 64