Olympus E-510 取り扱いマニュアル

78 

EN

Customizing the settings/f

unctions of your camera

You can lock and maintain the exposure by pressing the 

AEL/AFL (AE lock) button.

MENU[Y][AEL/AFL MEMO]

: Press the 

AEL/AFL button to lock and maintain the exposure. Press again to 

cancel the maintaining of the exposure.

: The exposure will be locked only while the 

AEL/AFL button is pressed.

Sets the metering mode for when pressing the 

AEL/AFL (AE lock) button to lock the 

exposure.
MENU[Y][AELMetering]

[AUTO]/[4]/[n]/[nHI]/[nSH]

• [AUTO] performs metering in the mode selected under [METERING] mode.

This allows you to change the EV step for exposure parameter setting, such as shutter 
speed, aperture value, exposure compensation value, etc.
MENU[Y][EV STEP]

When [ISO] is set to [AUTO], you can set the maximum ISO that is set automatically.
MENU[Y][ISO LIMIT]

This lets you apply the same compensation value to all the white balance modes at once.
MENU[Y][ALL>]

: The same compensation value applies to all WB modes.

: The WB compensation value settings applied to each WB mode are all 

cleared at once.

1) Use 

bd to select the color direction.

R-B Red

kBlue/G-M GreenkMagenta

2) Use 

ac to set compensate value. g “WB compensation” (P. 59)

• You can check the white balance you have adjusted.

1) Use 

ac to select [YES].

You can set the shutter speed that will be used when the built-in flash fires. The speed can be 
set from 1/60 to 1/180.
MENU[Y][#X-SYNC]

• For details on the synchronization speed of commercially available flashes, refer to their 

manuals.

s0010_e_00_unified.book  Page 78  Monday, April 9, 2007  6:12 PM