Olympus E-510 取り扱いマニュアル

EN

 79

Customizing the settings/f

unctions of your camera

The built-in flash pops up automatically in low light or backlight conditions while in the 

AUTO 

or scene mode.
This allows you to stop the built-in flash from popping up automatically.
MENU[Y][AUTO POP UP]

: The built-in flash pops up automatically.

: The built-in flash will not pop up automatically.

; FUNCTION

This lets you assign a function to the 

< button.

MENU[Y][; FUNCTION]

Does not allow function allocation.

V]

Press the 

< button to acquire the WB value.

g “Setting the one-touch white balance” (P. 60)

Pressing the shutter button while pressing the 

< button enables you to check the 

picture you have just taken on the monitor without having to record the picture to the 
card. This is useful when you want to see how a picture turned out without saving it.

While holding down the 

< button, you can take pictures using the camera settings 

registered in the [MY MODE SETUP]. 

g “My Mode setting” (P. 80)

While holding down the 

< button, you can use the preview function.

g “Preview function” (P. 35)

During live view shooting, you can brighten the monitor for easier confirmation on the subject.
MENU[Y][LIVE VIEW BOOST]

The subject is displayed on the monitor with the brightness level that is adjusted 
according to the exposure being set. You can shoot while confirming through the 
monitor in advance to get a picture that is to your liking.

The camera automatically adjusts the brightness level and displays the subject on the 
monitor for easier confirmation. The effect of the exposure compensation adjustments 
will not be reflected on the monitor.

You can set the control dial’s operation to settings the opposite from the factory default 
setting. The control dial can be used to operate the exposure compensation setting instead of 
the program shift setting in P mode, and the aperture value setting instead of the shutter 
speed setting in M mode.
MENU[Y][DIAL]

[P]/[M]

If you select [P]: P mode

pressing the F button

%

(factory default setting)

Program shift (

%)

Exposure compensation

F

Exposure compensation

Program shift (

%)

s0010_e_00_unified.book  Page 79  Monday, April 9, 2007  6:12 PM