Netgear R7900 - Nighthawk X6—AC3000 Tri-Band WiFi Gigabit Router ユーザーズマニュアル

ページ / 184
Hardware Setup 
12
Nighthawk
 X6 
AC3000
 Tri-Band
 WiFi Router 
Turn the LEDs On or Off Using the LED On/Off Switch
To turn the LEDs on or off using the LED On/Off switch:
Slide the LED On/Off switch on the rear panel to the On or Off position.
LED On/Off switch
The Power LED stays lit even if the LED On/Off switch is in the Off position.
Position Your Router
The router lets you access your network anywhere within the operating range of your 
wireless network. However, the operating distance or range of your wireless connection can 
vary significantly depending on the physical placement of your router. For example, the 
thickness and number of walls the wireless signal passes through can limit the range. 
Additionally, other wireless access points in and around your home might affect your router’s 
signal. Wireless access points are routers, repeaters, WiFi range extenders, and any other 
device that emits a wireless signal for network access.
Position your router according to the following guidelines:
Place your router near the center of the area where your computers and other devices 
operate and within line of sight to your wireless devices.
Make sure that the router is within reach of an AC power outlet and near Ethernet cables 
for wired computers.
Place the router in an elevated location, minimizing the number walls and ceilings 
between the router and your other devices.
Place the router away from electrical devices such as these:
-
Ceiling fans
-
Home security systems
-
Microwaves
-
Computers
-
Base of a cordless phone
-
2.4 GHz cordless phone
Place the router away from large metal surfaces, large glass surfaces, insulated walls, 
and items such as these: