Netgear R7900 - Nighthawk X6—AC3000 Tri-Band WiFi Gigabit Router ユーザーズマニュアル
Hardware Setup
13
Nighthawk
X6
AC3000
Tri-Band
WiFi Router
-
Solid metal doors
-
Aluminum studs
-
Fish tanks
-
Mirrors
-
Brick
-
Concrete
Cable Your Router
The following image shows how to cable your router:
Modem
Power adapter
Ethernet cable
Router
Internet
Computer
Computer
Figure 4. Router cabling
To cable your router:
1.
Unplug your modem’s power, leaving the modem connected to the wall jack for your
Internet service.
If your modem uses a battery backup, remove the battery.
2.
Plug in and turn on your modem.
If your modem uses a battery backup, put the battery back in.
3.
Connect your modem to the Internet port of your router with the yellow Ethernet cable that
came with your router.
4.
Connect the power adapter to your router and plug the power adapter into an outlet.
5.
Slide the LED On/Off switch on the rear panel to the On position.
6.
Press the Power On/Off button on the rear panel of the router.