Netgear WC7520 - ProSafe 20-AP Wireless Controller 参照マニュアル

WPA2 with Radius

AES

TKIP + AES

To configure WPA2 authentication with a RADIUS server:

1. Set up and enable an internal or external (RADIUS or LDAP) 

authentication server. For information, see 

2. From the Data Encryption drop-down list, select the type of 

encryption:

- AES. Supports AES only.

- TKIP + AES. Supports both TKIP and AES.

3. Select the Local or External radio button.

4. If you select the External radio button, select the 

authentication server that you wish to use from the 
drop-down list.

WPA & WPA2 with Radius

Use this option if 

there are both WPA and 
WPA2 clients in the 
network.

TKIP + AES

To configure WPA & WPA2 authentication with a RADIUS server:

1. Set up and enable an internal or external (RADIUS or LDAP) 

authentication server. For information, see 

2. Select the Local or External radio button.

3. If you select the External radio button, select the 

authentication server that you wish to use from the 
drop-down list.

The Data Encryption drop-down list displays TKIP + AES, 

which is the only available option. Both TKIP and AES are 
supported.

WPA-PSK

TKIP

TKIP + AES

To configure WPA-PSK authentication:

1. From the Data Encryption drop-down list, select the type of 

encryption:

- TKIP. Supports TKIP only.

- TKIP + AES. Supports both TKIP and AES.

2. Type a passphrase of at least 8 characters in the WPA 

Passphrase (Network Key) field.

WPA2-PSK

AES

TKIP + AES

To configure WPA2-PSK authentication:

1. From the Data Encryption drop-down list, select the type of 

encryption:

- AES. Supports AES only.

- TKIP + AES. Supports both TKIP and AES.

2. Type a passphrase of at least 8 characters in the WPA 

Passphrase (Network Key) field.