Netgear WC7520 - ProSafe 20-AP Wireless Controller 参照マニュアル
Managing Security Profiles and Profile Groups
85
ProSafe 20-AP Wireless Controller WC7520
The following table describes the fields that are shown for each profile in a profile group.
2.
Click the + button to create an additional profile group. The new profile group displays on the
advanced Profile Groups screen. By default, an NG_11g-0 profile and an NG_11a-0 profile
are present in a profile group.
advanced Profile Groups screen. By default, an NG_11g-0 profile and an NG_11a-0 profile
are present in a profile group.
Note:
By default, profile groups are named Group-1, Group-2, Group-3,
and so on. You cannot change these profile group names.
3.
Click Edit. The advanced Edit Profile screen displays.
Note:
The selections that are available In the Network Authentication field
are affected by the authentication server settings that you specify on
the Authentication Server screen. See
the Authentication Server screen. See
on page 122. If the
selection in the Network Authentication field requires authentication,
an additional field, the corresponding Authentication Server field,
displays.
an additional field, the corresponding Authentication Server field,
displays.
Table 17. Profile group settings
Setting
Description
Name
The unique profile name.
Radio
The wireless radio mode in which the profile is operating.
Authentication
The authentication setting under which the profile is operating.