Netgear FVX538v1 – ProSafe VPN Firewall Dual WAN with 8-Port 10/100 and 1 Gigabit LAN Port Switch 参照マニュアル
ProSafe VPN Firewall 200 FVX538 Reference Manual
System Logs and Error Messages
C-7
v1.0, March 2009
PPTP Idle-Timeout Logs.
PPP Authentication Logs.
Web Filtering and Content Filtering Logs
To enable web keyword filtering logs from the CLI, set the value of keywordLog to 1.
The CLI command is: monitor/firewallLogs/logger/loggerConfig keywordLog 1
Table C-10. System Logs: WAN Status, PPE, PPTP Idle-Timeout
Message
Nov 29 11:19:02 [FVX538] [pppd] Starting connection
Nov 29 11:19:05 [FVX538] [pppd] CHAP authentication succeeded
Nov 29 11:19:05 [FVX538] [pppd] local IP address 192.168.200.214
Nov 29 11:19:05 [FVX538] [pppd] remote IP address 192.168.200.1
Nov 29 11:19:05 [FVX538] [pppd] primary DNS address 202.153.32.2
Nov 29 11:19:05 [FVX538] [pppd] secondary DNS address 202.153.32.2
Nov 29 11:20:45 [FVX538] [pppd] No response to 10 echo-requests
Nov 29 11:20:45 [FVX538] [pppd] Serial link appears to be disconnected.
Nov 29 11:20:45 [FVX538] [pppd] Connect time 1.7 minutes.
Nov 29 11:20:45 [FVX538] [pppd] Sent 520 bytes, received 80 bytes.
Nov 29 11:20:51 [FVX538] [pppd] Connection terminated.
Nov 29 11:19:05 [FVX538] [pppd] CHAP authentication succeeded
Nov 29 11:19:05 [FVX538] [pppd] local IP address 192.168.200.214
Nov 29 11:19:05 [FVX538] [pppd] remote IP address 192.168.200.1
Nov 29 11:19:05 [FVX538] [pppd] primary DNS address 202.153.32.2
Nov 29 11:19:05 [FVX538] [pppd] secondary DNS address 202.153.32.2
Nov 29 11:20:45 [FVX538] [pppd] No response to 10 echo-requests
Nov 29 11:20:45 [FVX538] [pppd] Serial link appears to be disconnected.
Nov 29 11:20:45 [FVX538] [pppd] Connect time 1.7 minutes.
Nov 29 11:20:45 [FVX538] [pppd] Sent 520 bytes, received 80 bytes.
Nov 29 11:20:51 [FVX538] [pppd] Connection terminated.
Explanation
Message 1: Starting PPP connection process
Message 2: Message from server for authentication success
Message 3: Local IP address assigned by the server.
Message 4: Server side IP address.
Message 5: primary DNS configured in WAN status page.
Message 6: secondary DNS configured in WAN status page.
Message 7: Sensing idle link
Message 8: Idle link sensed
Message 9: Data sent and received at the LAN side during the link was up.
Message 10: PPP connection terminated after idle timeout
Message 2: Message from server for authentication success
Message 3: Local IP address assigned by the server.
Message 4: Server side IP address.
Message 5: primary DNS configured in WAN status page.
Message 6: secondary DNS configured in WAN status page.
Message 7: Sensing idle link
Message 8: Idle link sensed
Message 9: Data sent and received at the LAN side during the link was up.
Message 10: PPP connection terminated after idle timeout
Recommended Action
To reconnect during idle mode, initiate traffic from the LAN side.
Table C-11. System Logs: WAN Status, PPE, PPP Authentication
Message
Nov 29 11:29:26 [FVX538] [pppd] Starting link
Nov 29 11:29:29 [FVX538] [pppd] Remote message: Login incorrect
Nov 29 11:29:29 [FVX538] [pppd] PAP authentication failed
Nov 29 11:29:29 [FVX538] [pppd] Connection terminated.WAN2(DOWN)_
Nov 29 11:29:29 [FVX538] [pppd] Remote message: Login incorrect
Nov 29 11:29:29 [FVX538] [pppd] PAP authentication failed
Nov 29 11:29:29 [FVX538] [pppd] Connection terminated.WAN2(DOWN)_
Explanation
Starting link: Starting PPPoE connection process
Remote message: Login incorrect: Message from PPPoE server for incorrect
login
PAP authentication failed: PPP authentication failed due to incorrect login
Connection terminated: PPP connection terminated
Remote message: Login incorrect: Message from PPPoE server for incorrect
login
PAP authentication failed: PPP authentication failed due to incorrect login
Connection terminated: PPP connection terminated
Recommended Action
If authentication fails, then check the login/password and enter the correct one.