Netgear FVX538v1 – ProSafe VPN Firewall Dual WAN with 8-Port 10/100 and 1 Gigabit LAN Port Switch 参照マニュアル

ProSafe VPN Firewall 200 FVX538 Reference Manual

System Logs and Error Messages

C-9

v1.0, March 2009

Traffic Metering Logs

Unicast Logs

ICMP Redirect Logs

Multicast/Broadcast Logs

Table C-13. System Logs: Traffic Metering

Message

Jan 23 19:03:44 [TRAFFIC_METER] TRAFFIC_METER: Monthly Limit of 10
MB has reached for WAN1._

Explanation

Traffic limit to WAN1 that was set as 10Mb has been reached.
This stops all the incoming and outgoing traffic if configured like that in “When
Limit is reached” on Traffic Meter web page.

Recommended Action

To start the traffic, restart the Traffic Limit Counter.

Table C-14. System Logs: Unicast

Message

Nov 24 11:52:55 [FVX538] [kernel] UCAST IN=SELF OUT=WAN SRC=192.168.10.1
DST=192.168.10.10 PROTO=UDP SPT=800 DPT=2049

Explanation

• This packet (Unicast) is destined to the device from the WAN network.
• For other parameters, refer to

Table C-1

Recommended Action

None

Table C-15. System Logs: Unicast, Redirect

Message

Feb 2007 22 14:36:07 [FVX538] [kernel] [LOG_PACKET] SRC=192.168.1.49
DST=192.168.1.124 PROTO=ICMP TYPE=5 CODE=1

Explanation

• This packet is ICMP Redirect message sent to the router bye another router.
• For other parameters, refer to

Table C-1

Recommended Action

To enable these logs, from CLI command prompt of the router, enter this
command:

monitor/firewallLogs/logger/loggerConfig logIcmpRedirect 1

And to disable it,

monitor/firewallLogs/logger/loggerConfig logIcmpRedirect 0

Table C-16. System Logs: Multicast/Broadcast

Message

Jan 1 07:24:13 [FVX538] [kernel] MCAST-BCAST IN=WAN OUT=SELF
SRC=192.168.1.73 DST=192.168.1.255 PROTO=UDP SPT=138 DPT=138