Netgear FVX538v1 – ProSafe VPN Firewall Dual WAN with 8-Port 10/100 and 1 Gigabit LAN Port Switch 参照マニュアル

4-14

Firewall Protection and Content Filtering

To change the Default Outbound Policy:

1. Select Security from the main menu, Firewall Rules from the submenu and then select the 

DMZ WAN Rules tab. The DMZ WAN Rules screen will display. 

2. Click Add under the Outbound Services table. The Add DMZ WAN Outbound Services 

screen will display. 

3. Accept the default settings to block all services or select a specific service to block from the 

Services pull-down menu.

4. Click Apply. The Block Always rule will appear in the Outbound Services table. The rule is 

automatically enabled.

The procedures described in 

 for setting inbound and 

outbound rules on the standard LAN firewall are the same as the procedures used for setting 
inbound and outbound rules on the DMZ port firewall.

The LAN DMZ Rules screen allows you to create rules that define the movement of traffic 
between the LAN and the DMZ. The Default Outbound and Inbound Policies is to allow all traffic 
between the local LAN and DMZ network. Firewall rules can then be applied to block specific 
types of traffic from either going out from the LAN to the DMZ (Outbound) or coming in from the 
DMZ to the LAN (Inbound). 

To access the LAN DMZ Rules screen:

1. Select Security on the main menu, then select Firewall Rules and click the LAN DMZ Rules 

tab. The LAN DMZ Rules screen will display showing the both the Outbound Services and 
Inbound Services tables.