Netgear FVX538v1 – ProSafe VPN Firewall Dual WAN with 8-Port 10/100 and 1 Gigabit LAN Port Switch 参照マニュアル

4-16

Firewall Protection and Content Filtering

2. Complete the Outbound Service screen, and save the data (see 

). 

3. Click Reset to cancel your settings and return to the previous settings.

4. Click Apply to save your changes and reset the fields on this screen. The new rule will be 

listed on the Outbound Services table.

To define an Inbound LAN DMZ Rule:

1. Click Add under the Inbound Services table. The Add LAN DMZ Inbound Service screen 

will display.

2. Complete the Inbound Service screen and save the data (see 

3. Click Reset to cancel your settings and return to the previous settings.

4. Click Apply to save your settings. The new rule will be added to the Inbound Services table. 

This screen allows you to specify whether or not the router should be protected against common 
attacks in the DMZ, LAN and WAN networks. The various types of attack checks are listed on the 
Attack Checks screen and defined below:

–

Respond To Ping On Internet Ports. If you want the router to respond to a “Ping” from 
the Internet, click this check box. This can be used as a diagnostic tool. You shouldn't 
check this box unless you have a specific reason to do so.

–

Enable Stealth Mode. If enabled, the router will not respond to port scans from the WAN, 
thus making it less susceptible to discovery and attacks.

–

Block TCP Flood. A SYN flood is a form of denial of service attack in which an attacker 
sends a succession of SYN requests to a target system. When the system responds, the 
attacker doesn’t complete the connections, thus leaving the connection half-open and 
flooding the server with SYN messages. No legitimate connections can then be made. 

When enabled, the router will drop all invalid TCP packets and will be protected from a 
SYN flood attack.