Netgear UTM9S – ProSECURE Unified Threat Management (UTM) Appliance with DSL and Wireless modules 参照マニュアル
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
599
G
G.
Default Settings and Technical
Specifications
This appendix provides the default settings and the physical and technical specifications of the
UTM in the following sections:
UTM in the following sections:
Default Settings
You can use the factory default reset button located on the rear panel to reset all settings to
their factory defaults. This is called a hard reset (for more information, see
their factory defaults. This is called a hard reset (for more information, see
•
To perform a hard reset, press and hold the factory default reset button for approximately
8 seconds (until the Test LED blinks rapidly). The UTM returns to the factory
configuration settings that are shown in the following table.
8 seconds (until the Test LED blinks rapidly). The UTM returns to the factory
configuration settings that are shown in the following table.
•
Pressing the factory default reset button for a shorter period of time simply causes the
UTM to reboot.
The following table shows the default configuration settings for the UTM:
Table 181. UTM default configuration settings
Feature
Default behavior
Router login
User login URL
https://192.168.1.1
Administrator user name (case-sensitive)
admin
Administrator login password (case-sensitive)
password
Guest user name (case-sensitive)
guest
Guest login password (case-sensitive)
password