Netgear XCM8810 - 8800 SERIES 10-SLOT CHASSIS SWITCH ユーザーズマニュアル

The device supports the RFC 1493 Bridge MIB, RSTP-03, and 

NETGEAR STP MIB. Parameters of the s0 default STPD support 
RFC 1493 and RSTP-03. Parameters of any other STPD support 
the NETGEAR STP MIB.

If an STPD contains at least one port not in 802.1D (dot1D) mode, 

the STPD must be configured with an StpdID.

The following section provides more detailed STP configuration examples, including 802.1D, 
EMISTP, RSTP, and MSTP.

Displaying STP Settings

To display STPD settings, use the following command:

show stpd {<stpd_name> | detail}

To display more detailed information for one or more STPDs, specify the 

detail

 option.

This command displays the following information:

STPD name

STPD state

STPD mode of operation

Rapid Root Failover

Tag

Ports

Active VLANs

Bridge Priority

Bridge ID

Designated root

STPD configuration information

If you have MSTP configured on the switch, this command displays additional information:

MSTP Region

Format Identifier

Revision Level

Common and Internal Spanning Tree (CIST)

Total number of MST Instances (MSTI)