Netgear XCM8810 - 8800 SERIES 10-SLOT CHASSIS SWITCH ユーザーズマニュアル

multicast static route 58.1.10.0/24 is shown as UP only when the OSPF route is available to 
reach the network 58.1.10.0/24.

Static routes are stored in the switch configuration and can be viewed with the 

show 

configuration

 command. Static multicast routes that do not include protocol information are 

displayed using the 

configure iproute

 command format, even if they were created using the 

configure ipmroute

 command. Static routes that are created with a protocol field are 

displayed using the 

configure ipmroute

 command format.

PIM Configuration Examples

This section provides the following examples:

, the system labeled IR 1 is configured for IP multicast routing, using PIM-DM.