Netgear XCM8810 - 8800 SERIES 10-SLOT CHASSIS SWITCH ユーザーズマニュアル

•     Viewing a Configuration 

•     Returning to Factory Defaults 

•     ASCII-Formatted Configuration Files 

Viewing a Configuration

You can view the current configuration on the switch by using the following command:

show configuration {<module-name>} {detail}

 

You can also view just that portion of the configuration that applies to a particular module (for 
example, SNMP) by using the 

module-name

 parameter.

When you specify 

show configuration

 only, the switch displays configuration information for 

each of the switch modules excluding the default data. 

You can send output from the 

show configuration {<module-name>} {detail}

 command to 

the NETGEAR Technical Support department for problem-solving purposes. The output 
maintains the command line interface (CLI) format of the current configuration on the switch. 

Returning to Factory Defaults

To return the switch configuration to factory defaults and reboot the switch, use the following 
command:

unconfigure switch

 

This command resets most of the configuration, with the exception of user-configured user 
accounts and passwords, the date, and the time. 

To unset the currently selected configuration image, reset all switch parameters, and reboot 
the switch, use the following command:

unconfigure switch all

ASCII-Formatted Configuration Files

You can upload your current configuration in ASCII format to a TFTP server. The uploaded 
ASCII file retains the CLI format and allows you do the following:

View and modify the configuration using a text editor, and later download a copy of the file 

to the same switch or to one or more different switches.

Send a copy of the configuration file to NETGEAR Technical Support for problem-solving 

purposes.

The following summary describes only the CLI involved to transfer the configuration and load 
it on the switch; it is assumed that you know how to modify the configuration file with a text