Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch ユーザーズマニュアル
Chapter : Configuring Switching Information
|
169
ProSafe® XSM7224S 10G Managed Stackable Switch Software Administration Manual
Ports
The pages on the Ports tab allow you to view and monitor the physical port information for the
ports available on the switch. From the Ports link, you can access the following pages:
ports available on the switch. From the Ports link, you can access the following pages:
Port Configuration
Use the Port Configuration page to configure the physical interfaces on the switch.
To access the Port Configuration page, click Switching
Ports
Port Configuration
.
To configure port settings:
1.
Use Port to select the interface for which data is to be displayed or configured.
2.
Use STP Mode to select the Spanning Tree Protocol Administrative Mode for the port or
LAG. The possible values are:
•
Enable
-Select this to enable the Spanning Tree Protocol for this port.
•
Disable
-Select this to disable the Spanning Tree Protocol for this port.
3.
Use the Admin Mode pull-down menu to select the Port control administration state. You
must select enable if you want the port to participate in the network. The factory default is
enabled.