Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch ユーザーズマニュアル
Chapter : Configuring System Information
|
57
ProSafe® XSM7224S 10G Managed Stackable Switch Software Administration Manual
DHCP L2 Relay
From the DHCP L2 Relay link, you can access the following pages:
DHCP L2 Relay Global Configuration
To display the DHCP L2 Relay Global Configuration page, click System > Services > DHCP
L2
L2
Relay> DHCP L2 Relay Global Configuration. A screen similar to the following displays.
DHCP L2 Relay Global Configuration
1.
Use Admin Mode to enable or disable the DHCP L2 Relay on the switch. The default is
Disable.
DHCP L2 Relay VLAN Configuration
1.
VLAN ID
shows the VLAN ID configured on the switch.
2.
Use Admin Mode to enable or disable the DHCP L2 Relay on the selected VLAN.
3.
Use Circuit ID Mode to enable or disable the Circuit ID suboption of DHCP Option-82.
4.
Use Remote ID String to specify the Remote ID when Remote ID mode is enabled.
Requests Relayed
The total number of DHCP requests forwarded to the
server since the last time the switch was reset.
server since the last time the switch was reset.
Packets Discarded
The total number of DHCP packets discarded by this
Relay Agent since the last time the switch was reset.
Relay Agent since the last time the switch was reset.
Field
Description