Netgear M6100 – Campus Edge and SMB Core Chassis Switches ユーザーガイド

Use Search By to search for MAC Addresses by MAC Address, VLAN ID, and port:

 - Select MAC Address from the menu, enter the 6 byte 

hexadecimal MAC Address in two-digit groups separated by colons, for example 
01:23:45:67:89:AB. Then click on the “Go” button. If the address exists, that entry will 
be displayed as the first entry followed by the remaining (greater) mac addresses. An 
exact match is required.

 - Select VLAN ID from the menu, enter the VLAN ID, for 

example 100. Then click on the “Go” button. If the address exists, the entry will be 
displayed as the first entry followed by the remaining (greater) mac addresses.

 - Select Port from the menu, enter the port ID in Unit/Slot/Port, for 

example 2/1/1. Then click on the “Go” button. If the address exists, the entry will be 
displayed as the first entry followed by the remaining (greater) mac addresses.

Total MAC Address

Displaying the number of total MAC addresses 
learned or configured.

MAC Address

A unicast MAC address for which the switch has 

forwarding and/or filtering information. The format is 
a 6 byte MAC Address that is separated by colons, 
for example 01:23:45:67:89:AB.

VLAN ID

The VLAN ID associated with the MAC Address.

Port

The port upon which this address was learned.

Status

The status of this entry. The meanings of the values 
are:

Static: the value of the corresponding instance 
was added by the system or a user and cannot 
be relearned.

Learned: the value of the corresponding instance 
was learned, and is being used.

Management: the value of the corresponding 
instance is also the value of an existing instance 
of dot1dStaticAddress.

From the Advanced link, you can access the following pages:

This page allows the user to set the Address Aging Interval for the specified forwarding 
database.