Netgear M6100 – Campus Edge and SMB Core Chassis Switches ユーザーガイド

State

The VPC interface’s operational mode, which is one 
of the following:

Disabled

 

—

  VPC functionality is operationally 

disabled on the VPC interface.

Wait

  —

  The port channel is waiting for VPC 

functionality to be enabled on a port channel on 
the peer device.

Error

 

—

  VPC functionality is enabled on a port 

channel on both peer devices, but not all entry 
criteria are met for the port channel to be 
operational. For example, if the combined 
number of member ports for the VPC interface is 
more than the maximum allowed, then the state 
is set to Error on both devices.

Active

 

—

  VPC functionality is enabled on a port 

channel on both peer devices, and all entry 
criteria are satisfied. The VPC interface is 
operationally enabled, and traffic is allowed to 
flow through the VPC member ports.

Inactive

 

—

  The links connected to the VPC 

member ports are down, but the VPC interface 
on the peer remains active.



To display the Virtual Port Channel Interface Details page, click Switching > MLAG > 
Advanced > VPC Interface Details

. The following page is displayed.

Select an interface from the list of LAG Interfaces which are configured as VPC 

interfaces.

The following table describes the non-configurable VPC details that are displayed.