Netgear M6100 – Campus Edge and SMB Core Chassis Switches ユーザーガイド

Click Update to update the page with the latest information on the switch.

Use this page to display the system resources.

To display the System Resource page, click System > Management > System CPU Status. 

A screen similar to the following is displayed.

Internal AC-1, Internal AC-2, etc.

Indicates the status of the appropriate power module 
in each unit. Status can be any of the following:

Operational

 

—

  Power module is present and 

functioning properly.

Powering

 

—

  Main power is failed or disconnected 

but RPS provides power to the switch.

Not Present —

  Power module is not present in 

the slot.

Not powered

  —

  Power module is present but not 

connected to the power source.

Not powering —

  Power module is present and 

connected but the switch uses another power 
source.

Incompatible —

  Power module is present but 

incompatible.

Failed —

  Power module is present, but power 

cable is not plugged-in or a bad cable is 
plugged-in.

PoE Version

Version of the PoE controller FW image.
N/A indicates that the Poe is not supported by the 
unit.

MAX PoE

Indicates the status of maximum PoE power 
available on the switch as follows:

ON

 

—

  Indicates less than 10W of PoE power 

available for another device.

OFF

 

—

  Indicates at least 10W of PoE power 

available for another device.

N/A

 

—

  Indicates that PoE is not supported by the 

unit.

PoE D-Card Type

Indicates the type of the PoE daughter card plugged 
in. Possible values are:

XCM89P

 

—

  PoE card supporting 802.3at 

standard (backward compatible with 802.3af).

XCM89UP

 

—

  PoE card supporting UPOE 

pre-standard (backward compatible with 
802.3af/802.3at).

Not Installed

 

—

  PoE card is not plugged in.