Netgear M6100 – Campus Edge and SMB Core Chassis Switches ユーザーガイド

Use the IPv6 Address field to enter the IPv6 address in the format prefix/length. This option 

is visible when IPv6 loopback is selected.

Use the EUI64 field to optionally specify the 64-bit extended unique identifier (EUI-64). This 

option is visible when IPv6 loopback is selected.

From the System > Management > Network Interface link, you can access the following 
pages:

To display the IPv4 Network Configuration page, click System > Management > Network 
Interface > IPv4 Network Configuration

. A screen similar to the following is displayed.

The network interface is the logical interface used for in-band connectivity with the switch via 
any of the switch's front panel ports. The configuration parameters associated with the 
switch's network interface do not affect the configuration of the front panel ports through 
which traffic is switched or routed