Netgear S3300-28X-PoE+ (GS728TXP) - ProSAFE S3300 Smart Switch Series 管理者ガイド
Configuring Switching
114
S3300 Smart Switch
Link Aggregation Groups
Link aggregation groups (LAGs), which are also known as port channels, allow you to
combine multiple full-duplex Ethernet links into a single logical link. Network devices treat the
aggregation as if it were a single link, which increases fault tolerance and provides load
sharing. You assign the LAG VLAN membership after you create a LAG. The LAG by default
becomes a member of the default management VLAN (that is, VLAN 1).
combine multiple full-duplex Ethernet links into a single logical link. Network devices treat the
aggregation as if it were a single link, which increases fault tolerance and provides load
sharing. You assign the LAG VLAN membership after you create a LAG. The LAG by default
becomes a member of the default management VLAN (that is, VLAN 1).
A LAG interface can be either static or dynamic, but not both. All members of a LAG must
participate in the same protocols. A static port channel interface does not require a partner
system to be able to aggregate its member ports.
system to be able to aggregate its member ports.
Static LAGs are supported. When a port is added to a LAG as a static member, it neither
transmits nor receives LAGPDUs. The switch supports 26 LAGs.
transmits nor receives LAGPDUs. The switch supports 26 LAGs.
The LAGs menu contains the links described in the following sections.
•
•
•
•
LAG Configuration
Use the LAG Configuration screen to group one or more full-duplex Ethernet links to be
aggregated together to form a link aggregation group, which is also known as a port channel.
The switch treats the LAG as if it were a single link.
aggregated together to form a link aggregation group, which is also known as a port channel.
The switch treats the LAG as if it were a single link.
To configure LAG settings:
1.
Select Switching
LAG
Basic
LAG Configuration.
2.
Select the check box next to the LAG to configure.
You can select multiple LAGs to apply the same setting to the selected interfaces. Select
the check box in the heading row to apply the same settings to all interfaces.
the check box in the heading row to apply the same settings to all interfaces.
3.
Configure or view the following settings:
Note:
Click current members in the list to see existing member ports in that
LAG.
LAG.
•
LAG Name. Specify the name you want assigned to the LAG. You can enter any
string of up to 15 alphanumeric characters. A valid name has to be specified in order
to create the LAG
string of up to 15 alphanumeric characters. A valid name has to be specified in order
to create the LAG
•
Description. Specify the description string to be attached to a LAG. It can be up to 64
characters in length.
characters in length.