Netgear S3300-28X-PoE+ (GS728TXP) - ProSAFE S3300 Smart Switch Series 管理者ガイド
Configuring Routing
185
S3300 Smart Switch
Configure IP Settings
For information about how to configure and display IP routing data, see the following
sections:
sections:
•
•
•
IP Configuration
Use the IP Configuration screen to configure routing parameters for the switch.
To enable routing on the switch:
1.
Select Routing
IP > IP Configuration.
2.
Next to Routing Mode, select Enable.
You must enable routing for the switch before you can route through any of the
interfaces. Routing is also enabled or disabled per VLAN interface. The default value is
Disable.
interfaces. Routing is also enabled or disabled per VLAN interface. The default value is
Disable.
3.
Click the Apply button.
The following table describes the IP configuration information displayed on the screen.
Table 72. Global IP Status Information
Field
Description
Default Time to Live
The default value inserted into the Time-To-Live field of the IP
header of datagrams originated by the switch, if a TTL value is not
supplied by the transport layer protocol. The default value is 64.
header of datagrams originated by the switch, if a TTL value is not
supplied by the transport layer protocol. The default value is 64.
Maximum Next Hops
The maximum number of hops supported by the switch. This is a
compile-time constant. The default value is 1.
compile-time constant. The default value is 1.