Netgear GS728TS(B) – ProSAFE 24-Port Gigabit Stackable Smart Switch with 4 SFP uplinks ソフトウェアガイド

features on the GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switches, such 
as VLANs and ACLs.

, contains regulatory information about the 

GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switches.

Refer to the release notes for the GS728TS, GS728TPS, GS752TS, 

and GS752TPS Gigabit Smart Switches for information about issues 
and workarounds.

Getting Started with the Smart Switches

This chapter provides an overview of starting your GS728TS, GS728TPS, GS752TS, or 
GS752TPS Smart Switch and accessing the user interface. It also leads you through the 
steps to use the Smart Control Center utility. This chapter contains the following sections:

Switch Management Interface 

The NETGEAR GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches 
contain an embedded Web server and management software for managing and monitoring 
switch functions. Each switch can function as a simple switch without the management 
software. However, you can use the management software to configure more advanced 
features that can improve switch efficiency and overall network performance.

Web-based management lets you monitor, configure, and control your switch remotely using 
a standard Web browser instead of using expensive and complicated SNMP software 
products. From your Web browser, you can monitor the performance of your switch and 
optimize its configuration for your network. You can configure all switch features, such as 
VLANs, QoS, and ACLs by using the Web-based management interface.

NETGEAR provides the Smart Control Center utility with this product. This program runs 
under Microsoft

®

 Windows

®

 XP, Windows 2000, or Windows Vista

®

 and provides a front end