Netgear XCM8806 - 8800 SERIES 6-SLOT CHASSIS SWITCH ユーザーズマニュアル
Chapter 21. IPv6 Unicast Routing
|
649
NETGEAR 8800 User Manual
Displaying Neighbor-Discovery Cache Entries
Both statically configured and dynamic neighbor-discovery entries can be viewed using the
following command:
following command:
show neighbor-discovery {cache {ipv6}} {[<ipv6_addr> | <mac> | permanent] {vr
<vr_name>}} | vlan <vlan_name> | vr <vr_name>}
Managing Router Discovery
The following sections describe tasks for managing router discovery:
Enabling and Disabling Router Discovery
To enable or disable router discovery on a VLAN, use the following commands:
enable router-discovery {ipv6} vlan <vlan_name>
disable router-discovery {ipv6} vlan <vlan_name>
Adding and Deleting Prefixes for Router Discovery
To add or delete prefixes for advertisement by router discovery, use the following commands:
configure vlan <vlan_name> router-discovery {ipv6} add prefix <prefix>
configure vlan <vlan_name> router-discovery {ipv6} delete prefix [<prefix> |
all]
Configuring Router Discovery Settings
To configure the router discovery settings, use the following commands:
configure vlan <vlan_name> router-discovery {ipv6} default-lifetime
<defaultlifetime>
configure vlan <vlan_name> router-discovery {ipv6} hop-limit <currenthoplimit>
configure vlan <vlan_name> router-discovery {ipv6} link-mtu <linkmtu>
configure vlan <vlan_name> router-discovery {ipv6} managed-config-flag <on_off>
configure vlan <vlan_name> router-discovery {ipv6} max-interval <maxinterval>
configure vlan <vlan_name> router-discovery {ipv6} min-interval <mininterval>
configure vlan <vlan_name> router-discovery {ipv6} other-config-flag <on_off>
configure vlan <vlan_name> router-discovery {ipv6} reachable-time
<reachabletime>
configure vlan <vlan_name> router-discovery {ipv6} retransmit-time
<retransmittime>