Netgear M4300-24X (XSM4324CS) - Stackable Switches with Full PoE+ Provisioning ユーザーズマニュアル
Multicast Routing
439
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The following table describes the nonconfigurable data that is displayed.
Configure the IPv6 PIM Static Rendezvous Point
You can statically configure the rendezvous point (RP) address for one or more multicast
groups.
groups.
To configure the IPv6 PIM static RP:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> IPv6 Multicast > IPv6 PIM > Static RP Configuration.
6.
In the RP Address field, enter the IP address of the RP.
7.
In the Group Address field, enter the address of the RP.
8.
In the Prefix Length field, enter the group address prefix length.
9.
In the Override field, select Enable or Disable.
Enable
indicates that, if there is a conflict, the RP configured with this option prevails
over the RP learned by BSR.
Table 172. IPv6 PIM BSR Candidate Configuration
Field
Description
BSR Expiry Time (hh:mm:ss)
Time (in hours, minutes and seconds) in which the learned elected
bootstrap router (BSR) expires.
bootstrap router (BSR) expires.
IP Address
The IP address of the elected BSR.
Next bootstrap Message
(hh:mm:ss)
(hh:mm:ss)
Time (in hours, minutes, and seconds) in which the next bootstrap
message is due from this BSR.
message is due from this BSR.
Next Candidate RP Advertisement
(hh:mm:ss)
(hh:mm:ss)
Time (in hours, minutes, and seconds) in which the next candidate RP
advertisement is sent.
advertisement is sent.