Netgear M4300-24X (XSM4324CS) - Stackable Switches with Full PoE+ Provisioning ユーザーズマニュアル
Multicast Routing
441
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure the IPv6 MLD Routing Interface
To configure the IPv6 MLD routing interface:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> IPv6 Multicast > MLD > Routing Interface Configuration.
6.
Use one of the following methods to select an interface:
•
In the Go To Interface field, enter the interface in the unit/slot/port format and click on
the Go button.
the Go button.
•
Next to the Interface column, select the check box for the interface that you want to
configure.
configure.
7.
In the Admin Mode field, select Enable or Disable.
This sets the administrative status of MLD on the selected routing interface. The default is
Disable.
Disable.
8.
In the Version field, enter the version to configure for the selected interface.
Valid values are 1 to 2. The default value is 2.
9.
In the Query Interval field, enter the frequency in seconds at which MLD host-query
packets are to be transmitted on this interface.