Netgear FVS318N – Prosafe Wireless N VPN Firewall プリント

FVS318N> net wan wan1 ipv6 configure 

net-config[wan1-ipv6]> isp type dhcpc 

net-config[wan1-ipv6]> dhcpc stateless_mode_enable StatelessAddrAutoConfig 

net-config[wan1-ipv6]> dhcpc prefix_delegation_enable Y 

net-config[wan1-ipv6]> save

This command configures the IPv6 routing mode. After you have issued the net ipv6 
ipmode configure

 command, you enter the net-config [mode] mode, and then you can 

configure the IP mode. You can select support for IPv4 only or for both IPv4 and IPv6.

net

net-config [mode]

The IPv6 address of the secondary DNS 
server.

 

or 
StatefulAddrAutoConfig

Specifies the type of DHCPv6 mode 
(stateless or stateful). If you set the 
dhcpc stateless_mode_enable

 

keywords to 
StatelessAddrAutoConfig

, you 

have the option to set the dhcpc 
prefix_delegation_enable

 

keywords and associated parameter.

 or N 

Enables or disables prefix delegation if 
the dhcpc stateless_mode_enable 
keywords are set to 
StatelessAddrAutoConfig

. Prefix 

delegation allows the ISP’s stateful 
DHCPv6 server to assign a prefix.

ip_type {IPv4_Only | IPv4/IPv6}