Netgear FVS318N – Prosafe Wireless N VPN Firewall プリント
Net Mode Configuration Commands
75
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
IPv4 Routing Commands
net routing static ipv4 configure <route name>
This command configures an IPv4 static route. After you have issued the net routing
static ipv4 configure
static ipv4 configure
command to specify the name of the new route, you enter the
net-config [static-routing-ipv4] mode, and then you can configure one keyword and
associated parameter or associated keyword at a time in the order that you prefer.
associated parameter or associated keyword at a time in the order that you prefer.
Step 1
Format
Mode
net
Step 2
Format
Mode
net-config [static-routing-ipv4]
Keyword
Associated Keyword to
Select or Parameter to Type
Select or Parameter to Type
Description
Y
or N
Specifies whether or not the route is an active
route.
route.
Y
or N
Specifies whether or not the route can be shared
with other gateways when RIP is enabled.
with other gateways when RIP is enabled.
The destination IP address.
The destination subnet mask.
custom_vlan <VLAN
name>, dmz, lan, or wan
Specifies the interface for which the route is
applied. The DMZ, LAN, and WAN interfaces are
self-explanatory. If you select the custom_vlan
keyword, you also need to specify the VLAN
name.
applied. The DMZ, LAN, and WAN interfaces are
self-explanatory. If you select the custom_vlan
keyword, you also need to specify the VLAN
name.
The gateway IP address.
The metric (integer) for this route. The number can
be from 2 to 15.
be from 2 to 15.
Command example:
FVS318N> net routing static ipv4 configure Orly
net-config[static-routing-ipv4]> active_flag Y
net-config[static-routing-ipv4]> private_flag Y
net-config[static-routing-ipv4]> destination_address 10.118.215.178
net-config[static-routing-ipv4]> subnet_mask 255.255.255.0
net routing static ipv4 configure <route name>
active_flag {Y | N}
private_flag {Y | N}
destination_address <ipaddress>
subnet_mask <subnet mask>
interface {custom_vlan <VLAN name> | dmz | lan | wan}
gateway_address <ipaddress>
metric <number>
active_flag
private_flag
destination_address ipaddress
subnet_mask
subnet mask
interface
gateway_address
ipaddress
metric
number