Netgear FVS318v3 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch 参照マニュアル

4-26

Basic Virtual Private Networking

•

WAN IP of the remote VPN gateway (e.g., 14.15.16.17)

•

LAN IP settings of the remote VPN gateway:

–

IP Address (e.g, 192.168.0.1)

–

Subnet Mask (e.g., 255.255.255.0)

–

Preshared Key (e.g., 12345678)

7. Use the VPN Status screen to activate the VPN tunnel by performing the following steps:

a. Open the FVS318v3 management interface and click on VPN Status under VPN to get the 

VPN Status/Log screen (

).

b. Click on VPN Status (

) to get the Current VPN Tunnels (SAs) screen 

(

). Click on Connect for the VPN tunnel you want to activate.

Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See