Netgear FVS318Gv2 – ProSAFE VPN Firewall Series 参照マニュアル

If you selected the Yes radio button, enter the login name in the Login field and the 

password in the Password field. 

This information is provided by your ISP.

In the ISP Type section, select the type of ISP connection that you use from the two listed 

options. 

If your connection is PPTP or PPPoE, your ISP requires an initial login. 

Enter the settings as described in the following table: 

PPTP

For login 

and password 
information, see 

 and 

If your ISP is Austria Telecom or any other ISP that uses PPTP for login, select this 
radio button, and enter the following settings:

Account Name The account name is also known as the host name or system name. 

Enter the valid account name for the PPTP connection (usually your 
email ID assigned by your ISP). Some ISPs require you to enter 
your full email address here.

Domain Name

Your domain name or workgroup name assigned by your ISP, or 
your ISP’s domain name. You can leave this field blank. 

Idle Timeout

Select the Keep Connected radio button to keep the connection 
always on. To log out after the connection is idle for a period, select 
the Idle Timeout radio button and, in the Idle Timeout field, enter 
the number of minutes to wait before disconnecting. This is useful if 
your ISP charges you based on the period that you are logged in. 

My IP Address

The IP address assigned by the ISP to make the connection with the 
ISP server. 

Server IP 
Address

The IP address of the PPTP server.