Netgear GSM7248v2 - ProSAFE 48 Port Layer 2 Gigabit L2 Ethernet Switch ユーザーズマニュアル
18
|
Chapter 1. Getting Started
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Interface Naming Convention
The ProSafe® Managed Switches support physical and logical interfaces. Interfaces are
identified by their type and the interface number. The physical ports are gigabit interfaces and
are numbered on the front panel. You configure the logical interfaces by using the software.
identified by their type and the interface number. The physical ports are gigabit interfaces and
are numbered on the front panel. You configure the logical interfaces by using the software.
describes the naming convention for all interfaces available on the switch.
Table 3.
Interface
Description
Example
Physical
The physical ports are gigabit
Ethernet interfaces and are
numbered sequentially starting
from one.
Ethernet interfaces and are
numbered sequentially starting
from one.
1/0/1, 1/0/2, 1/0/3, and so on
Link Aggregation Group (LAG)
LAG interfaces are logical
interfaces that are only used for
bridging functions.
interfaces that are only used for
bridging functions.
lag 1, lag 2, lag 3, and so on
CPU Management Interface
This is the internal switch interface
responsible for the switch base
MAC address. This interface is not
configurable and is always listed in
the MAC Address Table.
responsible for the switch base
MAC address. This interface is not
configurable and is always listed in
the MAC Address Table.
0/5/1
Routing VLAN Interfaces
This is an interface used for routing
functionality.
functionality.
Vlan 1, Vlan 2, Vlan 3, and so on