Netgear GSM7248v2 - ProSAFE 48 Port Layer 2 Gigabit L2 Ethernet Switch ユーザーズマニュアル
362
|
Chapter 4. Routing
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
PIM-SM
From the PIM-SM link, you can access the following pages:
PIM-SM Global Configuration
To display the PIM-SM Global Configuration page, click Routing
Multicast
PIM-SM
Global Configuration.
1.
Use Admin Mode to set the administrative status of PIM-SM in the router. The default is
disable.
disable.
2.
Use Data Threshold Rate (kbps) to enter the rate in K bits/second above which the
last-hop router will switch to a source-specific shortest path tree. The valid values are from 0
to 2000. The default value is 0
last-hop router will switch to a source-specific shortest path tree. The valid values are from 0
to 2000. The default value is 0
3.
Use Register Threshold Rate (kbps) to enter the rate in K bits/second above which the
Rendezvous Point router will switch to a source-specific shortest path tree. The valid values
are from 0 to 2000. The default value is 0
Rendezvous Point router will switch to a source-specific shortest path tree. The valid values
are from 0 to 2000. The default value is 0