Netgear GS510TP – ProSAFE 8-Port Gigabit Smart Switch with PoE and 2 fiber SFP ports 管理者ガイド
Getting Started
15
GS510TP and GS110T Gigabit Smart Switches
2.
Open a Web browser on your PC and connect to the management interface as described in
15.
3.
Change the network settings on the switch to match those of your network (this procedure is
described in
).
After you change the network settings on the switch, return the network configuration on your
administrative system to the original settings.
administrative system to the original settings.
Web Access
To access the GS110T or GS510TP management interface, use one of the following
methods:
methods:
•
From the Smart Control Center, select the switch and click Web Browser Access.
•
Open a Web browser and enter the IP address of the switch in the address field.
You must be able to ping the IP address of the GS110T or GS510TP management interface
from your administrative system for Web access to be available. If you used the Smart
Control Center to set up the IP address and subnet mask, either with or without a DHCP
server, use that IP address in the address field of your Web browser. If you did not change
the IP address of the switch from the default value, enter 192.168.0.239 into the address
field.
from your administrative system for Web access to be available. If you used the Smart
Control Center to set up the IP address and subnet mask, either with or without a DHCP
server, use that IP address in the address field of your Web browser. If you did not change
the IP address of the switch from the default value, enter 192.168.0.239 into the address
field.
Clicking Web Browser Access on the Smart Control Center or accessing the switch directly
from your Web browser displays the login screen shown in the following figure.
from your Web browser displays the login screen shown in the following figure.
Figure 2. Login Screen