Netgear GS510TP – ProSAFE 8-Port Gigabit Smart Switch with PoE and 2 fiber SFP ports 管理者ガイド
Getting Started
26
GS510TP and GS110T Gigabit Smart Switches
Help Page Access
Every page contains a link to the online help
, which contains information to assist in
configuring and managing the switch. The online help pages are context sensitive. For
example, if the IP Addressing page is open, the help topic for that page displays if you click
Help.
example, if the IP Addressing page is open, the help topic for that page displays if you click
Help.
interface.
User-Defined Fields
User-defined fields can contain 1 to 159 characters, unless otherwise noted on the
configuration Web page. All characters may be used except for the following (unless
specifically noted in for that feature):
configuration Web page. All characters may be used except for the following (unless
specifically noted in for that feature):
\
<
/
>|
*
|
?
Using SNMP
The GS510TP and GS110T switch software supports the configuration of SNMP groups and
users that can manage traps that the SNMP agent generates. GS510TP and GS110T
switches use both standard public MIBs for standard functionality and private MIBs that
support additional switch functionality. All private MIBs begin with a “-” prefix. The main object
for interface configuration is in -SWITCHING-MIB, which is a private MIB. Some interface
configurations also involve objects in the public MIB, IF-MIB.
users that can manage traps that the SNMP agent generates. GS510TP and GS110T
switches use both standard public MIBs for standard functionality and private MIBs that
support additional switch functionality. All private MIBs begin with a “-” prefix. The main object
for interface configuration is in -SWITCHING-MIB, which is a private MIB. Some interface
configurations also involve objects in the public MIB, IF-MIB.
SNMP is enabled by default. The System > Management > System Information Web page,
which is the page that displays after a successful login, displays the information you need to
configure an SNMP manager to access the switch.
which is the page that displays after a successful login, displays the information you need to
configure an SNMP manager to access the switch.
Any user can connect to the switch using the SNMPv3 protocol, but for authentication and
encryption, the switch supports only one user which is admin; therefore there is only one
profile that can be created or modified.
encryption, the switch supports only one user which is admin; therefore there is only one
profile that can be created or modified.
To configure authentication and encryption settings for the SNMPv3 admin profile by using
the Web interface:
the Web interface:
1.
Navigate to the System > SNMP > SNMPv3 > User Configuration page.
2.
To enable authentication, select an Authentication Protocol option, which is either MD5 or
SHA.
3.
To enable encryption, select the DES option in the Encryption Protocol field. Then, enter
an encryption code of eight or more alphanumeric characters in the Encryption Key field.
4.
Click Apply.