Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Netgear
  4. M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3
  5. 管理者ガイド

Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 管理者ガイド

ダウンロード
ページ / 688
ACLs 
173
 Managed Switches
3. 
Create VLAN 200 with port 1/0/48 and assign IP address 192.168.200.1/24.
4. 
Add two static routes so that the switch forwards the packets with destinations 
192.168.100.0/24 and 192.168.30.0/24 to the correct next hops.
Web Interface: Configure One-Way Access Using a TCP
Flag in an ACL
This is a two-part process:
•
•
Configuring VLAN and IP addresses on switch A
1. 
Create VLAN 30 with IP address 192.168.30.1/24.
a. Select Routing > VLAN > VLAN Routing Wizard. 
A screen similar to the following displays.
(Netgear Switch) #vlan database
(Netgear Switch) (Vlan)#vlan 200 
(Netgear Switch) (Vlan)#vlan routing 200 
(Netgear Switch) (Config)#interface 1/0/48 
(Netgear Switch) (Interface 1/0/48)#vlan pvid 200 
(Netgear Switch) (Interface 1/0/48)#vlan participation include 200 
(Netgear Switch) (Interface 1/0/48)#exit 
(Netgear Switch) #interface vlan 200 
(Netgear Switch) (Interface-vlan 200)#routing
(Netgear Switch) (Interface-vlan 200)#ip address 192.168.200.2 255.255.255.0
(Netgear Switch) (Interface-vlan 200)#exit
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#ip route 192.168.100.0 255.255.255.0 192.168.200.1 
(Netgear Switch) (Config)#ip route 192.168.30.0 255.255.255.0 192.168.200.1