Netgear EVA9150 – Digital Entertainer Elite ユーザーガイド

5-13

Here are some tips for correcting simple problems that might occur when you are using the 
NETGEAR Universal Remote.

LED does not blink when you 
press a button.

Replace battery with one new 3.3V 2032 lithium 
battery.

LED blinks when you press a 
button, but device does not 
respond.

Make sure that the remote is aimed at your 
device and is not more than 15 feet away.

LED blinks one long blink.

An entry error has occurred (for example, the 
wrong button). Try the entry sequence again.

Remote does not control devices, 
or commands are not working 
correctly.

Try all listed codes for the device. Make sure 
that the device operates with an infrared remote 
control. 

CH+, CH-, and LAST do not work 
for your RCA TV.

Due to RCA design from 1983 to 1987, only the 
original remote control will operate these 
functions.

No volume on a device.

See 

Channels do not change properly.

If the original remote control required you to 
press Enter to change channels, press Enter on 
this remote after entering the channel number.