Netgear RDD1 – ReadyDATA 516 Disk Packs RDD1LT02, RDD1LT03, RDD1LT04, RDD1SM01 ソフトウェアガイド

Configure the settings as explained in the following table:

Name

Enter a name to identify the UPS:

For an SNMP UPS, enter any name.

For a remote, UPS you do not have any options: You must enter UPS. 

Description

An optional description to help identify the UPS.

Type

From the drop-down list, select one of the following options:

SNMP UPS. An SNMP UPS lets the ReadyDATA query the manufacturer-specific MIB. 
The ReadyDATA monitors and manages the UPS through SNMP.

Remote UPS. A remote UPS is attached to a remote server, such as a ReadyNAS or 
a Linux server that is running Network UPS Tools (NUT). The ReadyDATA monitors 
and manages the UPS over the remote connection.

SNMP UPS

Address

Enter the IP address of the SNMP UPS.

Community

Enter public or private, depending on the manufacturer’s requirement or the 
UPS’s configuration.

MIB

From the drop-down list, select the MIB for one of the following 
manufacturers: