Netgear RDD1 – ReadyDATA 516 Disk Packs RDD1LT02, RDD1LT03, RDD1LT04, RDD1SM01 ソフトウェアガイド
System Maintenance and Monitoring
174
ReadyDATA OS 1.4
To edit a UPS device in the UPS table:
1.
Select System > Settings > UPS.
The following figure shows the UPS screen with one UPS device:
2.
In the UPS table, highlight the UPS device that you want to modify.
3.
Click the gear icon to the right of the UPS table.
The UPS Settings screen displays. The fields on this screen are identical to those on the
Add UPS screen (see the figures in
of
171).
4.
Modify the settings as required.
You cannot change the type settings.
5.
Click Apply.
The modified UPS settings are displayed in the UPS table.
To remove a UPS device from the UPS table:
1.
Select System > Settings > UPS.
The following figure shows the UPS screen with one UPS device:
MFR
The detected manufacturer of the UPS.
Address
The IP address of the UPS.
Item
Description