Netgear WNR2200 - N300 Wireless Router インストールガイド

Installing Your Wireless Router Manually (Advanced and Linux Users)

14

First, plug in and turn on the cable or DSL modem (if your modem has a backup battery, plug 
it back in). Wait 2 minutes.

Now, plug the power cord into your N300 wireless router and into a power outlet. Wait 1 
minute. 

Last, turn on your computer. It might take several minutes for your router to establish a 
connection with your computer and your Internet provider.

Verify that your router is connected correctly by checking the wireless router status lights (as 
illustrated in 

Check the N300 wireless router status lights to verify the following:

•

Power/Test. The Power light (4) should turn solid green. If it does not, see 

.

•

Internet. The Internet port light (2) should be lit. If it is not, make sure that the Ethernet cable 
is securely attached to the N300 wireless router Internet port and that the modem, and that the 
modem is powered on.

For DSL customers, if software logs you in to the Internet, do not run that 
software. You might need to go to the Internet Explorer Tools menu, select 
Internet Options, and then click the Connections tab, where you can select 
Never dial a connection.