Netgear WNR612v3 - Wireless-N 150 2-Port Router ユーザーズマニュアル

To use the push button method, either click the WPS button on this screen or press 

the WPS button on the side of the router. Within 2 minutes, go to the wireless client 
and press its WPS button to join the network without entering a password.

To use the PIN method, select the PIN Number radio button, enter the client security 

PIN, and click Next.

Within 2 minutes, go to the client device and use its WPS software to join the network 
without entering a password.

The router attempts to add the WPS-capable device.

Repeat Step 2 and Step 3 to add another WPS client to your network.

Setup Menu



Select Advanced > Setup to display the Setup menu. 

The following selections are available:

. Go to the same Internet Setup screen that you can access from the 

dashboard on the Basic Home screen. See 

19.

. Go to the same Wireless Settings screen that you can access from 

the dashboard on the Basic Home screen. See 

24.

. This is a shortcut to the same Guest Network screen that you can 

access from the dashboard on the Basic Home screen. See 

29.

. Internet (WAN) setup. See 

37.

. Quality of Service (QoS) setup. See 

WAN Setup

The WAN Setup screen lets you configure a DMZ (demilitarized zone) server, change the 
Maximum Transmit Unit (MTU) size, and enable the router to respond to a ping on the WAN 
(Internet) port.