Netgear WGX102v2 - 54 Mbps Wall-Plugged Wireless Range Extender 参照マニュアル

7-12

Advanced Configuration of the WGX102

5. If your Internet connection does require a login, fill in the settings according to the instructions 

below.

a.

Select your Internet service provider from the drop-down list. Your choices are:

•

PPPoE — if you have installed PPP software such as WinPoET (from Earthlink) or 
Enternet (from Pacbell), then you are using PPPoE. For more information, see 

•

PPTP — this protocol is used in Austria and other European countries. For more 
information, see 

b. The screen changes according to the ISP settings requirements of the ISP you select.

c.

Fill in the parameters for your Internet service provider.

d. Click Apply to save your settings. Click the Test button to verify you have Internet access.

If your ISP uses PPPoE, select PPPoE for the Internet Service Provider.

•

Enter the Account Name, Domain Name, Login, and Password as provided by your ISP. These 
fields are case sensitive. The wireless range extender tries to discover the domain 
automatically if you leave the Domain Name blank. Otherwise, you may need to enter it 
manually.

•

To change the login timeout, enter a new value in minutes. This determines how long the 
wireless range extender keeps the Internet connection active after there is no Internet activity 
from the LAN. Entering a timeout value of zero means never log out.

Note: You no longer need to run the ISP’s login program on your PC in order to access the 
Internet. When you start an Internet application, your wireless range extender automatically logs 
you in.