Xerox 2101 ST Digital Copier/Printer インストールガイド

Select Yes to allow the Fiery EX2101 to obtain its Ethernet IP address by searching the 
network. Depending on your network and the protocol you select in the following 
option (DHCP or BOOTP), the IP address can change. Select No to assign the 
Fiery EX2101 a static IP address. If you select No, you proceed to the IP Address 
option, where you manually set the IP address. 

This option appears only if you answered Yes to Enable Auto IP Configuration. Select 
the protocol over which the Fiery EX2101 should search for its IP address. Both 
DHCP and BOOTP allow the Fiery EX2101 to obtain the Ethernet IP address and 
Subnet Mask automatically. 

Depending on your network, the Fiery EX2101 may be assigned a different address 
after you restart the Fiery EX2101. With the DHCP setting, the Fiery EX2101 can be 
assigned a different address even if it is not restarted. Make sure the network is already 
configured properly for the protocol you select.

Network Setup

Protocol Setup

TCP/IP Setup

Select Yes if you have a TCP/IP network connected to the Fiery EX2101 over 
Ethernet cabling.

If you are using TCP/IP for printing from Windows computers, enabling 

TCP/IP here also enables you to use Fiery utilities from Windows computers using 
TCP/IP protocols.