Xerox 2101 ST Digital Copier/Printer インストールガイド
1
1-19
Setting up PostScript or PCL printing with Windows NT 4.0
5.
Enter the Fiery EX2101 IP address or DNS name.
6.
If you want your printer driver to display the current settings when opened, select
Update Fiery Driver When Opened.
Update Fiery Driver When Opened.
7.
Click Update.
8.
Click OK.
Completing the Windows NT 4.0 printer connection
To print from Windows NT 4.0, you must:
• Set up network servers, if any.
• Set up the Fiery EX2101 to accept print jobs from your computer.
• Configure a port on each Windows NT 4.0 computer for the network type.
Completing the Windows NT 4.0 TCP/IP and LPR connection
After you have installed the PostScript or PCL printer driver and printer driver files,
complete the setup for the TCP/IP and LPR connection as follows:
complete the setup for the TCP/IP and LPR connection as follows:
• Prepare the Fiery EX2101 to accept print jobs using TCP/IP and LPR protocols.
For details, see the
Configuration Guide
.
• Enable LPD printing from the Control Panel.
For details, see the
Configuration
Guide
.
• Configure the computer for the TCP/IP connection.
To do this
See
Configure the TCP/IP (LPR port)
connection
connection
Configure the IPX (Novell) connection
Setting up Windows (SMB) printing