Xerox WorkCentre 3335/3345 ユーザーガイド
Connecting to a Telephone Line
Note
Not all options listed are supported on all printers. Some options apply only to a specific
printer model, configuration, operating system, or driver type.
printer model, configuration, operating system, or driver type.
1. Connect a standard RJ11 cable, No. 26 American Wire Gauge (AWG) or larger, to the
Line port on the back of the printer.
2. Connect the other end of the RJ11 cable to an operating telephone line.
3. Enable and configure the Fax functions.
3. Enable and configure the Fax functions.
For details, refer to the System Administrator Guide at:
•
•
Turning On or Off the Printer
Before turning on the printer, ensure that the power cord is plugged into the printer and
wall outlet, and that the the power switch is in the off position.
wall outlet, and that the the power switch is in the off position.
The printer has a power Down button on the touch screen and a power switch on the
back-left side.
back-left side.
• The power down button initiates an orderly shutdown of the printer electronic
components.
• The power switch controls the main power to the printer.
3-5
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
User Guide
Installation and Setup