Craftsman 35710 ユーザーズマニュアル

English

WARNING!

Read and understand all

instructions. Failure to follow all instructions listed

below, may result in electric shock, fire and/or

serious personal injury.



Battery tools do not have to be plugged into an

electrical outlet; therefore, they are always in

operating condition. Be aware of possible hazards

when not using your battery tool or when changing

accessories. Following this rule will reduce the risk of

electric shock, fire, or serious personal injury.



Do not place battery tools or their batteries near

fire or heat. This will reduce the risk of explosion and

possibly injury.



Do not crush, drop or damage battery pack. Do

not use a battery pack or charger that has been

dropped or received a sharp blow. A damaged

battery is subject to explosion. Properly dispose of a

dropped or damaged battery immediately.



Batteries can explode in the presence of a source

of ignition, such as a pilot light. To reduce the risk

of serious personal injury, never use any cordless

product in the presence of open flame. An exploded

battery can propel debris and chemicals. If exposed,

flush with water immediately.



Do not charge battery tool in a damp or wet

location. Following this rule will reduce the risk of

electric shock.



Charge only with Craftsman dual-chemistry

battery chargers. Use of other chargers may result in

personal injury, fire, or damage



Do not charge battery in an area of extreme

heat or cold. It will work best at normal room

temperature. To reduce the risk of serious

personal injury, do not store outside or in vehicles.



Under extreme usage or temperature conditions,

battery leakage may occur. If liquid comes in

contact with your skin, wash immediately with

soap and water. If liquid gets into your eyes, flush

them with clean water for at least 10 minutes, then

seek immediate medical attention. Following this

rule will reduce the risk of serious personal injury.



When battery pack is not in use, keep it away

from other metal objects like: paper clips, coins,

keys, nails, screws, or other small metal objects

that can make a connection from one terminal to

another. Shorting the battery terminals together may

cause sparks, burns, or a fire.



Always remove battery pack from your tool when

you are assembling parts, making adjustments,

cleaning, or when not in use. Removing battery

pack will prevent accidental starting that could cause

serious personal injury.



Always remove battery pack before storing the

device.



Always wear eye protection with side shields

marked to comply with ANSI Z87.1. Failure to do

so could result in objects being thrown into your eyes

and other possible serious injuries.



Keep battery pack dry, clean, and free from oil and

grease. Always use a clean cloth when cleaning.

Never use brake fluids, gasoline, petroleum-based

products, or any solvents to clean battery pack.

 Save these instructions. Refer to them frequently

and use them to instruct others who may use this

tool. If you loan someone this tool, loan them these

instructions.

CALIFORNIA PROPOSITION 65

WARNING:

This product may contain chemicals,

including lead, known to the state of California to

cause cancer, birth defects or other reproductive

harm.

Wash hands after handling.

LITHIUM-ION BATTERY PACKS

Lithium-ion batteries deliver fade free power for their

entire run time. Lithium-ion tools will not gradually lose

power due to decreasing battery charge. Instead, power

from the battery pack will drop from full to zero once the

full charge has been drained from the battery. Once this

happens, recharging of the battery is required.
It is not necessary to drain the battery pack completely

before recharging.

BATTERY PROTECTION FEATURES

Lithium-ion battery packs are designed with features that

protect the lithium-ion cells and maximize battery life.
If the tool stops during use, release the trigger to reset

and resume operation. If the tool still does not work, the

battery needs to be recharged.

COLD WEATHER OPERATION

The lithium-ion battery pack can be used in temperatures

down to 32°F (0°C). Put the battery pack on a tool and use

the tool in a light duty application. After about a minute,

the pack will warm up and begin operating normally.

SAFETY RULES

OPERATION

To register your Craftsman product, please visit:

http://www.sears.com/craftsman
Use this battery pack for Craftsman 19.2V Lithium-ion

cordless products only. Refer to the Operator’s Manual

provided with product. Always mention the model number

above when communicating with us regarding this battery

pack.

19.2 VOLT

LITHIUM-ION

BATTERY PACK

315.PP2011

315.PP2025
315.PP2012