Craftsman 35710 ユーザーズマニュアル

English

These batteries have been designed to provide maximum 

trouble-free life. However, like all batteries, they will 

eventually wear out. Do not disassemble battery pack 

and attempt to replace the batteries. Handling of these 

batteries, especially when wearing rings and jewelry, could 

result in a serious burn.
For battery pack storage longer than 30 days:


  Store the battery pack where the temperature is 

below 80°F and away from moisture.



  Store battery packs in a 30%-50% charged condition.



  Every six months of storage, charge the pack as 

normal.

To preserve natural resources, please recycle 

or dispose of batteries properly.
This product contains lithium-ion batteries. 

Local, state or federal laws may prohibit 

disposal of batteries in ordinary trash.
Consult your local waste authority for information regarding 

available recycling and/or disposal options. 

 

Upon removal, cover the battery 

pack’s terminals with heavy-duty adhesive tape. 

Do not attempt to destroy or disassemble battery 

pack or remove any of its components. Batteries 

must be recycled or disposed of properly. Also, 

never touch both terminals with metal objects and/

or body parts as short circuit may result. Keep 

away from children. Failure to comply with these 

warnings could result in fire and/or serious injury.

See Figure 1.
Battery packs are shipped in a low charge condition to 

prevent possible problems. Therefore, you should charge 

prior to first use. If the charger does not charge the battery 

pack under normal circumstances, return both the battery 

pack and charger to your nearest Authorized Service 

Center for electrical check.


  Charge the battery pack only with the recommended 

charger.



  Refer to charger operator’s manual for charging 

instructions.

When using a tool continuously, the battery pack may 

become hot. A hot battery pack may be placed directly 

onto the charger port but charging will not begin until 

the battery temperature cools to within acceptable 

temperature range. When a hot battery pack is placed 

on the charger, the charger may indicate the pack is 

not ready to charge. Please refer to charger operator’s 

manual. When the battery pack cools, the charger will 

automatically begin charging.

A cold battery pack may be placed directly onto the 

charger port but charging will not begin until the battery 

temperature warms to within acceptable temperature 

range. When a cold battery pack is placed on the charger, 

the charger may indicate the pack is not ready to charge. 

Please refer to charger operator’s manual. When the 

battery pack warms, the charger will automatically begin 

charging.

Craftsman Consumer Helpline: 1-800-932-3188 

Sears Brands Management, 3333 Beverly Rd.

Hoffman Estates, IL 60179 USA

Visit the Craftsman web page: www.sears.com/craftsman

990000208

5-16-13 (REV:03)