Zanussi ZHP9022X ユーザーズマニュアル

When  installing  the  hood  in  ducting  version,  a  rigid  or

a  flexible  pipe  with  the  diameter  corresponding  to  the

flange  diameter  is  used  in  order  to  connect  the  hood

to the air outlet piping.

•  Fix the pipe with an adequate quantity of pipe clamps

(not supplied).

•  Remove possible charcoal filters.

•  Cut a hole ø 125 mm in any shelf that may be posi-

tioned over the hood.

•  Insert the flange

10a on the hood body outlet.

•  Connect  the  flange  to  the  outlet  on  the  shelf  over

the hood using a flexible or rigid pipe ø120 mm.

•  Fix the pipe in position using sufficient pipe clamps

(not supplied).

•  Fix the directional grille

8 on the recirculation air outlet

using the 2 screws

12e (2,9 x 12,7) provided.

•  Ensure that the activated charcoal filters have been

inserted.

12e

8

Electrical Connection

•  Connect  the  hood  to  the  mains  through  a  two-pole

switch having a contact gap of at least 3 mm..